Sales and Support: +44 (0) 7899 998277   |   Email: tporritt@tatham-uk.com

Single-Machine Series

40 products    |    Page 1 of 2   |   1  2  next

Function and Characteristics 1. Open and blend the fibers prior to the next process 2. There are several options for the opener depended on the fibers to be used 3. These

More Info.

YYKS Opener

To open and electronically weigh the correct proportion of fiber.  Several sets maybe combined together dependent on the number of fiber types to be blended together. Main

More Info.

YYKB Bale Opener

Input width ≤2800mm Output width (2500-9000) mm Lapping speed ≤90m/min Suitable web weight ≥20 gram /㎡ Structure High quality anti-static carbon type apron

More Info.

YYPW-I Four-belt Crosslapper

The machine used to feed the voluminous webs from the cross lapper to the needle loom evenly with minimum draft. Anti-static wedge shape feeding device and nylon-finger feeding rol

More Info.

YYQS-II Felt Drafter

Used for after treatment of nonwoven fabric to improve its surface and quality. Main specifications Working width (2000-6000) mm Mechanical speed ≤20m/min Surface temp. Ͱ

More Info.

YYTG Surface Treatment Machine

Used where high pressure is required for maximum control of thickness or surface treatment and bonding of light weight nonwoven material. Main specifications Working width (1800 -3

More Info.

YYRZ Calender

The machine is used to process the batt of fiber to obtain a hard and thick thermal-bonding wadding. The low melt fiber will combine other fibers together through hot air penetrati

More Info.

YYH-II Thermal-bonding oven

The machine is used to process the web to obtain the required hard and thick thermal-bonding wadding. The low melt fiber will combine other fibers together through hot air penetrat

More Info.

YYH-I Thermal-bonding oven

Function and characteristics. This feeder is used for feeding fine to medium denier fibers to the card. The opened fiber is fed to upper trunk of this machine, after further openin

More Info.

YYGM-1 Pneumatic feeder

Used for cross cutting for sheeting applications and winding soft compact roll. In addition, edge-trim knives and other slitting devices can be added according to individual applic

More Info.

YYHQ Cross-Cutter & Winder

This feeder is used for medium to coarse denier fibers to store the opened fiber and then facilitate the transfer of an even layer or even quantity of fiber across the width of the

More Info.

YYGM-II Vibrating Feeder

- Working width:1550-2500mm - Capacity:150-500kg/h - Doffer Output speed:≤ 45m/min Description a) Machine frame is made of high quality stee

More Info.

YYSL Carding Machine

The machine used to feed the voluminous webs from the cross lapper to the needle loom evenly with minimum draft.  Anti-static wedge shape feeding device and nylon-finger fe

More Info.

YYWR-Batt Feeder

High Performance Card - Working width:1550-3200mm - Output capacity:200-1000kg/h/set - Output speed:≤80m/min - Web net weight: 20~80 g/m2 Descr

More Info.

YYSL-IC2D2 Carding Machine

Used for pre-punching and reinforcing the web. The single board up punching or down punching can be selected according to individual needling system. The lower needle density is fo

More Info.

YYGZ-I Pre-needle loom

unction Used for reinforcing and surface finishing of the nonwoven fabrics. Main specifications Working width (2200~10000) mm Needle density (4000~8000) n/m Needle st

More Info.

YYGZ-II Needle loom

- Machine working width 600mm - Suitable for polyester staple fibre, nylon fibre, polypropylene fibre etc - Fibre specification 2.5Dtex-15dtex, 38mm-76mm; suitable for other

More Info.

YYSL-IVC1D1 Carding Machine

Function Used for reinforcing and surface finishing of the nonwoven fabrics. Main specifications Working width (2200-8000) mm Needle density (5000-8000) n/m*2 boards Needle stroke

More Info.

YYGZ-III Tandem needleloom

Function Used for reinforcing and surface finishing of the nonwoven fabrics. Main specifications Working width (2200-8000) mm Needle density (5000-8000) n/m*2 boards Needle stroke

More Info.

YYGZ-IV Needle loom

Function Used for reinforcing and surface finishing of the nonwoven fabrics. Main specifications Working width (2200-8000) mm Needle density (5000-8000) n/m Needle stroke (25-50) m

More Info.

YYGZ-V Needleloom

Function Used for the production of needle punching nonwovens such as garments interlining, basic felt for carpet, geotextiles. Main specifications Working width (2200-10000) mm Ne

More Info.

YYZS Needleloom

Function and characteristics This machine is mainly used for producing designs using single-color or multi-color effects on nonwoven substrates to make pattern and rib carpets, whi

More Info.

YYTH Pattern Needle Loom

Raw Material Synthetic fiber such as PET,PP ETC. Product weight (200-1000)gsm Working width: 2400-5600mm Needle density: 5000n/m Needle stroke: 35mm Needle frequency: 10004/min

More Info.

YYTW Rib needleloom

Function Used for dying nonwovens. Main specifications Working width (1800-3500) mm Cylinder qty. (19-30) pcs Cylinder diameter ¢570mm Heating method hot oil circulation, st

More Info.

YYHG Cylinder drying machine

The device is used to compress and compact wadding roll into a smaller more compact roll for ease of packing and shipping.

More Info.

YYDB Packer

The purpose of random velour machine is to make a pile effect on the surface of a nonwoven substrate for end uses such as automotive, floor covering, wall covering and felt for toy

More Info.

YYQR Random Velour needleloom

Page 1 of 2   |   1  2  next